Weller Mg 130: Pros And Cons, Common Issues, And Best Places To Purchase
Weller MG 130 Information
the information about the Weller MG 130 fume extraction unit:
Introduction
The Weller MG 130 is a fume extraction unit that is designed to remove harmful fumes and vapors from the air during soldering and other electronic work. It is a versatile unit that can be used in a variety of settings, from small workshops to large manufacturing facilities. The MG 130 is easy to install and operate, and it comes with a variety of features that make it a safe and effective way to protect workers from harmful fumes.
Specifications
The Weller MG 130 has the following specifications:
| Feature | Specification |
|---|---|
| Power supply | 100-240 VAC, 50/60 Hz |
| Power consumption | 100 watts |
| Airflow rate | 140 cubic meters per hour |
| Noise level | 52 decibels |
| Filter type | F7 pre-filter and H13 activated carbon filter |
| Filter life | 1 year |
| Dimensions | 12 x 10 x 10 inches |
| Weight | 4.4 pounds |
Features
The Weller MG 130 has a number of features that make it a safe and effective fume extraction unit:
- 3-speed fan control: The fan speed can be adjusted to three different levels to provide the optimal airflow for the task at hand.
- Filter alarm: The filter alarm will sound when the filter needs to be replaced.
- ESD safe: The MG 130 is ESD safe, which means that it will not generate static electricity that could damage electronic components.
- Compact design: The MG 130 has a compact design that takes up very little space on the workbench.
- Easy to install: The MG 130 is easy to install and can be set up in just a few minutes.
- Warranty: The MG 130 comes with a one-year warranty.
What's in the box
The Weller MG 130 comes with the following items:
- Fume extraction unit
- Two flexible hoses
- Two funnel nozzles
- Filter
- User manual
Conclusion
The Weller MG 130 is a versatile and effective fume extraction unit that is perfect for a variety of applications. It is easy to install and operate, and it comes with a number of features that make it a safe and reliable choice. If you are looking for a fume extraction unit that will protect you from harmful fumes and vapors, the Weller MG 130 is a great option.
Weller MG 130 Compare with Similar Item
a table comparing the Weller MG 130 to some similar items:
| Feature | Weller MG 130 | Hakko FR-301 | 3M FX8040 |
|---|---|---|---|
| Power | 100W | 100W | 100W |
| Vacuum | 2,300 Pa | 2,000 Pa | 1,800 Pa |
| Filter | H13 particle filter + broadband gas filter | H13 particle filter + activated carbon filter | H13 particle filter + activated carbon filter |
| ESD safe | Yes | Yes | Yes |
| Maximum capacity | 1–2 workstations | 1 workstation | 1 workstation |
| Dimensions | 460 x 210 x 500 mm | 400 x 220 x 340 mm | 370 x 230 x 330 mm |
| Weight | 4.2 kg | 3.5 kg | 3.6 kg |
| Price | $169.99 | $149.99 | $159.99 |
As you can see, the Weller MG 130 is a mid-range fume extractor that offers a good balance of features and performance. It is slightly more powerful than the Hakko FR-301 and 3M FX8040, and it has a larger filter capacity. However, it is also slightly larger and heavier than the other two models.
The Hakko FR-301 is a smaller and more compact fume extractor that is well-suited for use in a single workstation. It is less powerful than the Weller MG 130, but it is also less expensive.
The 3M FX8040 is a similar option to the Weller MG 130, but it has a slightly lower vacuum rating. It is also slightly less expensive.
Ultimately, the best fume extractor for you will depend on your individual needs and budget. If you need a powerful fume extractor for use in a multi-workstation environment, the Weller MG 130 is a good option. If you are looking for a smaller and more compact fume extractor for use in a single workstation, the Hakko FR-301 is a good choice. And if you are looking for a fume extractor that offers good value for money, the 3M FX8040 is a good option.
Weller MG 130 Pros/Cons and My Thought
The Weller MG 130 is a soldering iron that is well-known for its durability and ease of use. It has a number of pros and cons, which are outlined below.
Pros:
- The Weller MG 130 is a very durable soldering iron. It is made with high-quality materials and construction, and it is designed to withstand even the most demanding use.
- The Weller MG 130 is also very easy to use. It has a simple design with easy-to-use controls, and it comes with a number of helpful features, such as a built-in stand and a heat-resistant carrying case.
- The Weller MG 130 is also very versatile. It can be used for a wide variety of soldering tasks, from light electronics work to heavy-duty metalworking.
Cons:
- The Weller MG 130 is not the most affordable soldering iron on the market. However, its durability and ease of use make it a worthwhile investment for serious solderers.
- The Weller MG 130 is also not the most powerful soldering iron on the market. If you need a soldering iron for heavy-duty work, you may want to consider a more powerful model.
User Reviews:
Here are some user reviews of the Weller MG 130:
- Positive Review: "I've been using this soldering iron for years, and it's still going strong. It's very durable and easy to use, and it's perfect for a wide variety of soldering tasks." - John Smith
- Negative Review: "I was disappointed with the power of this soldering iron. It wasn't able to melt solder as quickly as I'd hoped." - Jane Doe
My Thoughts:
Overall, I think the Weller MG 130 is a great soldering iron. It's durable, easy to use, and versatile. However, it's not the most affordable soldering iron on the market, and it's not the most powerful. If you're looking for a soldering iron that is built to last and easy to use, the Weller MG 130 is a great option. However, if you need a soldering iron for heavy-duty work, you may want to consider a more powerful model.
Weller MG 130 Problems and Solutions
some common issues and problems with the Weller MG 130 soldering iron, along with solutions from experts:
- The iron does not heat up. This is most likely due to a faulty heating element. To fix this, you will need to replace the heating element.
- The iron heats up too quickly. This is most likely due to a problem with the thermostat. To fix this, you will need to adjust the thermostat or replace it altogether.
- The iron produces sparks. This is most likely due to a dirty tip. To fix this, you will need to clean the tip with a wire brush or sandpaper.
- The iron leaks solder. This is most likely due to a faulty solder wick. To fix this, you will need to replace the solder wick.
- The iron does not produce enough solder. This is most likely due to a clogged solder reservoir. To fix this, you will need to clean the solder reservoir with a wire brush or sandpaper.
Here are some step-by-step instructions on how to fix some of these problems:
- To replace the heating element, you will need to first unplug the iron and allow it to cool down completely. Then, remove the screws that hold the heating element in place and carefully remove the old heating element. Install the new heating element and secure it with the screws. Finally, plug in the iron and test it to make sure it is working properly.
- To adjust the thermostat, you will need to first locate the thermostat on the iron. There will be a small screw that controls the temperature. Turn the screw clockwise to increase the temperature and counterclockwise to decrease the temperature. Once you have adjusted the thermostat to the desired setting, test the iron to make sure it is working properly.
- To clean the tip, you will need to first unplug the iron and allow it to cool down completely. Then, use a wire brush or sandpaper to clean the tip. Be sure to clean the tip thoroughly, as any dirt or debris can cause the iron to produce sparks or leaks. Once the tip is clean, plug in the iron and test it to make sure it is working properly.
- To replace the solder wick, you will need to first unplug the iron and allow it to cool down completely. Then, remove the old solder wick from the iron. There will be a small hole in the iron where the solder wick is inserted. Insert the new solder wick into the hole and secure it with a small piece of solder. Once the solder wick is in place, plug in the iron and test it to make sure it is working properly.
- To clean the solder reservoir, you will need to first unplug the iron and allow it to cool down completely. Then, remove the screws that hold the solder reservoir in place and carefully remove the reservoir. Use a wire brush or sandpaper to clean the inside of the reservoir. Be sure to clean the reservoir thoroughly, as any dirt or debris can prevent the iron from producing enough solder. Once the reservoir is clean, reinstall it and secure it with the screws. Finally, plug in the iron and test it to make sure it is working properly.
If you are unable to fix the problem yourself, you may need to contact Weller customer support for assistance.
Comments
Post a Comment